VOLVO TRUCK FL MK I 220 6.6L 162kW/217HP LUCAS

Centralita LUCAS PLCC 28HC256 · 220 CV (162 kW) · 6600 cc · Diesel sovralimentato

Base de datos de centralitasVOLVO TRUCK › VOLVO TRUCK FL MK I 220 6.6L 162kW/217HP LUCAS

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 13 versiones de firmware

Datos del vehículo

MarcaVOLVO TRUCK
ModeloFL MK I
Motor220 6.6L 162kW/217HP LUCAS
Potencia de serie220 CV / 162 kW
Cilindrada6600 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteLUCAS
ModeloPLCC 28HC256
Memoria / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección al ralentí
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de carga
  • Limitador de gases al ralentí
  • Limitador de gases a carga parcial
  • Limitador de gases a plena carga

Identificadores de firmware (13)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
03161965XXXX1948 1.55.106 LUCAS PLCC 28HC256
03161965XXXX1480 1.55.005 LUCAS PLCC 28HC256
08192397XXXX1945 1.55.002 LUCAS PLCC 28HC256
08192397XXXX3674 1.55.115 LUCAS PLCC 28HC256
08192397XXXX3671 1.55.003 LUCAS PLCC 28HC256
08192397XXXX1948 1.55.005 LUCAS PLCC 28HC256
20412508XXXX1945 1.55.002 LUCAS PLCC 28HC256
20412508XXXX1948 1.55.004 LUCAS PLCC 28HC256
20412508XXXX3671 1.55.005 LUCAS PLCC 28HC256
20412508XXXX3P01 1.55.003 LUCAS PLCC 28HC256
20412508XXXX3674 1.55.105 LUCAS PLCC 28HC256
20577133XXXX3075 1.55.108 LUCAS PLCC 28HC256
20577133XXXX8863 1.55.003 LUCAS PLCC 28HC256

Notas de la centralita

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.