VOLVO TRUCK FH MK II 460 12L 338kW/453HP LUCAS

Centralita LUCAS PLCC 28HC256 · 460 CV (338 kW) · 12000 cc · Diesel sovralimentato

Base de datos de centralitasVOLVO TRUCK › VOLVO TRUCK FH MK II 460 12L 338kW/453HP LUCAS

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 50 versiones de firmware

Datos del vehículo

MarcaVOLVO TRUCK
ModeloFH MK II
Motor460 12L 338kW/453HP LUCAS
Potencia de serie460 CV / 338 kW
Cilindrada12000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteLUCAS
ModeloPLCC 28HC256
Memoria / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección al ralentí
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de carga 2
  • Limitador de carga
  • Limitador de gases al ralentí
  • Limitador de gases a carga parcial
  • Limitador de gases a plena carga

Identificadores de firmware (50)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
1.55.111 LUCAS PLCC 28HC256
03161952XXXX3116 1.55.115 LUCAS PLCC 28HC256
03161952XXXX3116 1.55.116 LUCAS PLCC 28HC256
03161952XXXX3116 1.55.142 LUCAS PLCC 28HC256
03161952XXXX3116 1.55.129 LUCAS PLCC 28HC256
03161952XXXX3298 1.55.003 LUCAS PLCC 28HC256
03161962XXXX8111 1.55.109 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.010 LUCAS PLCC 28HC256
03161962XXXX3403 1.55.006 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.112 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.003 LUCAS PLCC 28HC256
03161962XXXX6747 1.55.005 LUCAS PLCC 28HC256
03161962XXXX1788 1.55.122 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.113 LUCAS PLCC 28HC256
03161962XXXX7020 1.55.111 LUCAS PLCC 28HC256
03161962XXXX9627 1.55.114 LUCAS PLCC 28HC256
03161962XXXX3116 1.55.115 LUCAS PLCC 28HC256
03161962XXXX1678 1.55.004 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.002 LUCAS PLCC 28HC256
03161962XXXX9524 1.55.117 LUCAS PLCC 28HC256
03161962XXXX3087 1.55.118 LUCAS PLCC 28HC256
03161962XXXX3393 1.55.116 LUCAS PLCC 28HC256
03161962XXXX9627 1.55.120 LUCAS PLCC 28HC256
03161962XXXX4692 1.55.014 LUCAS PLCC 28HC256
08170700XXXX3116 1.55.115 LUCAS PLCC 28HC256
08170700XXXX3116 1.55.012 LUCAS PLCC 28HC256
08170700XXXX3041 1.55.004 LUCAS PLCC 28HC256
08170700XXXX3298 1.55.009 LUCAS PLCC 28HC256
0817070000053425 1.55.005 LUCAS PLCC 28HC256
08170700XXXX3318 1.55.003 LUCAS PLCC 28HC256
08170700XXXX3116 1.55.114 LUCAS PLCC 28HC256
20411962XXXX4692 1.00.015 LUCAS PLCC 28HC256
20412506XXXX3116 1.55.114 LUCAS PLCC 28HC256
20412506XXXX3087 1.55.113 LUCAS PLCC 28HC256
20412506XXXX3297 1.55.003 LUCAS PLCC 28HC256
20412506XXXX3116 1.55.110 LUCAS PLCC 28HC256
20412509 P01874302_K 1.55.009 LUCAS PLCC 28HC256
20577131XXXX8111 1.55.011 LUCAS PLCC 28HC256
20577131XXXX1678 1.55.005 LUCAS PLCC 28HC256
20577131XXXX3403 1.55.007 LUCAS PLCC 28HC256
20577131XXXX0983 1.55.009 LUCAS PLCC 28HC256
20577131XXXX6747 1.55.112 LUCAS PLCC 28HC256
20577131XXXX3075 1.55.107 LUCAS PLCC 28HC256
20577131XXXX8156 1.55.110 LUCAS PLCC 28HC256
20577131XXXX0981 1.55.006 LUCAS PLCC 28HC256
20582958XXXX3298 1.55.002 LUCAS PLCC 28HC256
20582958XXXX3073 1.55.007 LUCAS PLCC 28HC256
20582958XXXX3116 1.55.005 LUCAS PLCC 28HC256
20582958XXXX3075 1.55.004 LUCAS PLCC 28HC256
3161952XXXX3087 1.55.003 LUCAS PLCC 28HC256

Notas de la centralita

Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.
Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.