VOLKSWAGEN PASSAT 5 (B5/B5.5) 2.5L V6 24V TDI 110kW/150HP PLCC

Centralita BOSCH MOTRONIC EDC · 150 CV (11 kW) · 2500 cc · Diesel sovralimentato

Base de datos de centralitasVOLKSWAGEN › VOLKSWAGEN PASSAT 5 (B5/B5.5) 2.5L V6 24V TDI 110kW/150HP PLCC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 7 versiones de firmware

Datos del vehículo

MarcaVOLKSWAGEN
ModeloPASSAT 5 (B5/B5.5)
Motor2.5L V6 24V TDI 110kW/150HP PLCC
Potencia de serie150 CV / 11 kW
Cilindrada2500 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloMOTRONIC EDC
Memoria / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Corrección de inyección
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (7)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810019462287351140/1 16 bit 1.01.002 BOSCH MOTRONIC EDC
02810019472287350619/20 16 bit 1.01.004 BOSCH MOTRONIC EDC 16BIT
02810019382287350619/620 1.01.009 BOSCH TDI
02810019382287356795/796 1.01.010 BOSCH TDI
02810101451037357025/026 1.01.010 BOSCH TDI
02810101461037357027/8 1.01.003 BOSCH TDI
02810101472287357029-030 1.01.020 BOSCH TDI

Notas de la centralita

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL.

Módulos adicionales disponibles

→ See all add-on modules on the shop