VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

Centralita BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina sovralimentato

Base de datos de centralitasVOLKSWAGEN › VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 125kW/168HP ME7.1.1

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 3 versiones de firmware

Datos del vehículo

MarcaVOLKSWAGEN
ModeloJETTA 5 (A5)
Motor2.5L 20V 125kW/168HP ME7.1.1
Potencia de serie170 CV / 125 kW
Cilindrada2500 cc
CombustibleBenzina sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.1.1
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Avance optimal
  • Cálculo de carga motor deseada
  • Corrección de Lambda en fonction temperatura del motor después del arranque
  • Temperatura del gas de escape
  • Inyección a carga parcial
  • Limitador de revoluciones/velocidad
  • Enriquecimiento Lambda para la protección de los componentes
  • Limitador de revoluciones 2
  • Limitador de revoluciones 3
  • Lambda pedida
  • Limitador sensor de picado
  • Limitador de velocidad
  • Cálculo de flujo de masa de aire del acelerador
  • Retardo presión absoluta del colector
  • Debimetro secundario
  • Par óptimal del motor
  • Par pedido
  • Gestion ángulo mariposa

Identificadores de firmware (3)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612011271037393225 1.84.00407K906032Q 9934 BOSCH ME7.1.1
02612015041037383980 1.42.00307K906032BC 0603 BOSCH ME7.1.1
02612016791037390701 1.84.00307K906032BM 0711 BOSCH ME7.1.1

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata