VOLKSWAGEN GOLF 3 (A3) 1.9L TDI 81kW/109HP PLCC

Centralita BOSCH MOTRONIC EDC TDI · 110 CV (81 kW) · 1900 cc · Diesel sovralimentato

Base de datos de centralitasVOLKSWAGEN › VOLKSWAGEN GOLF 3 (A3) 1.9L TDI 81kW/109HP PLCC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 7 versiones de firmware

Datos del vehículo

MarcaVOLKSWAGEN
ModeloGOLF 3 (A3)
Motor1.9L TDI 81kW/109HP PLCC
Potencia de serie110 CV / 81 kW
Cilindrada1900 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloMOTRONIC EDC TDI
Memoria / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Fase de inyección
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (7)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
0281001472/31037355219/220 16 bit 1.01.009 BOSCH MOTRONIC EDC TDI
0281001484 1.01.006 BOSCH MOTRONIC EDC TDI
02810016501037358903/4 1.01.007 BOSCH MOTRONIC EDC TDI
0281001650 1.01.015 BOSCH MOTRONIC EDC TDI
02810016521037358904/5 16bit 1.01.014 BOSCH MOTRONIC EDC TDI
02810018601037356653/4 16 bit 1.01.004 BOSCH MOTRONIC EDC TDI
02810019671037354430/1 16 bit 1.01.004 BOSCH MOTRONIC EDC TDI

Notas de la centralita

2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. CHKSUM HHH=2228 and LLL=669A. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.