MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

Centralita BOSCH EDC15C6 · 163 CV (12 kW) · 2700 cc · Diesel sovralimentato

Base de datos de centralitasMERCEDES › MERCEDES M CLASS W163 ML270 2.7L 20V CDI 120kW/161HP EDC15

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 10 versiones de firmware

Datos del vehículo

MarcaMERCEDES
ModeloM CLASS W163
MotorML270 2.7L 20V CDI 120kW/161HP EDC15
Potencia de serie163 CV / 12 kW
Cilindrada2700 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloEDC15C6
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Inyección para el sensor de presión turbo 2
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Limitador de carga
  • Limitador de gases
  • Presión especifica inyección
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (10)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810102831037351225 1.05.023 BOSCH EDC15C6
02810102831037351225 1.05.019 BOSCH EDC15C6
02810103101037351226 1.05.002 BOSCH EDC15C6
02810105181037351393 1.05.004 BOSCH EDC15C6
02810105371037351544 1.05.009 BOSCH EDC15C6
02810105461037351417 1.05.022 BOSCH EDC15C6
02810105461037351417 1.05.028 BOSCH EDC15C6
02810107961037351671 1.05.032 BOSCH EDC15C6
02810114071037365119 1.05.006 BOSCH EDC15C6
02810114081037365120 1.05.051 BOSCH EDC15C6

Notas de la centralita

original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.