MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

Centralita BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

Base de datos de centralitasMERCEDES › MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 4 versiones de firmware

Datos del vehículo

MarcaMERCEDES
ModeloE CLASS W210
MotorE300 3.0L TD 130kW/175HP MOTRONIC
Potencia de serie177 CV / 13 kW
Cilindrada3000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloEDC1.4
Memoria / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire

Identificadores de firmware (4)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810014941037355763/4 1.01.015 BOSCH EDC1.4
02810017531037357845/6 1.01.015 BOSCH MOTRONIC EDC
02810018801037356586/7 1.01.035 BOSCH MOTRONIC EDC
02810018801037352663/4 1.01.000 BOSCH MOTRONIC EDC

Notas de la centralita

2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.