MERCEDES C CLASS W203 C32 AMG 3.2L V6 260kW/349HP ME2.8

Centralita BOSCH ME2.8 · 354 CV (26 kW) · 3200 cc · Benzina aspirato

Base de datos de centralitasMERCEDES › MERCEDES C CLASS W203 C32 AMG 3.2L V6 260kW/349HP ME2.8

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 5 versiones de firmware

Datos del vehículo

MarcaMERCEDES
ModeloC CLASS W203
MotorC32 AMG 3.2L V6 260kW/349HP ME2.8
Potencia de serie354 CV / 26 kW
Cilindrada3200 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME2.8
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Lambda/AFR a plena carga
  • Lambda/AFR a carga parcial
  • Avance optimal
  • Corrección limitador turbo para el sensor APS/BPS
  • Referencia de carga acelerador / posición mariposa
  • Gestión de llenado del motor
  • Limitador de revoluciones
  • Limitador de revoluciones para LSD
  • Limitador de velocidad
  • Par máximo indicado
  • Retardo presión absoluta del colector
  • Debimetro secundario
  • Par admisible relativa de la posición del pedal en la limitación de par
  • Llenado del motor solicitada
  • Corrección de la pulsación de admisión variable

Identificadores de firmware (5)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
03154518321037351615 1.16.022 BOSCH ME2.8
03154518321037351615 1.16.007 BOSCH ME2.8
11215316791037351894 1.16.015 BOSCH ME2.8
11215346791037365087 1.16.016 BOSCH ME2.8
11215388791037377860 1.16.016 BOSCH ME2.8

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.