CLAAS LEXION 760 12.5L 390kW/523HP ADEM IV

Centralita CATERPILLAR ADEM IV · 530 CV (39 kW) · 12500 cc · Diesel sovralimentato

Base de datos de centralitasCLAAS › CLAAS LEXION 760 12.5L 390kW/523HP ADEM IV

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 12 versiones de firmware

Datos del vehículo

MarcaCLAAS
ModeloLEXION
Motor760 12.5L 390kW/523HP ADEM IV
Potencia de serie530 CV / 39 kW
Cilindrada12500 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTractor

Centralita

FabricanteCATERPILLAR
ModeloADEM IV
Memoria / EPROMCaterpillar ADEM IV

Operaciones / opciones de tuning disponibles:

  • Limitador de carga 2
  • Limitador de carga

Identificadores de firmware (12)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
4750788-00 1.00.004 CATERPILLAR ADEM IV
4558557-00 1.00.007 CATERPILLAR ADEM IV
5175545-00 1.00.003 CATERPILLAR ADEM IV
5910509-00 1.00.002 CATERPILLAR ADEM IV
4945783-00 1.00.023 CATERPILLAR ADEM IV
4204243-00 1.00.021 CATERPILLAR ADEM IV
4750786-00 1.00.005 CATERPILLAR ADEM IV
5757560-00 1.00.010 CATERPILLAR ADEM IV
2622878-012956288-00 1.00.004 CATERPILLAR ADEM IV
4787932-004799895-00 1.00.003 CATERPILLAR ADEM IV
4787932-014799895-00 1.00.004 CATERPILLAR ADEM IV
4787932-015204867-00 1.00.003 CATERPILLAR ADEM IV

Notas de la centralita

Original EPROM SPANSION S29CL016J PQFP 80 Pin - Microprocesor Motorola MPC563/4. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 561/2 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata