CLAAS JAGUAR 890 16L 370kW/496HP TEMIC

Centralita TEMIC TEMIC PLD · 503 CV (37 kW) · 16000 cc · Diesel sovralimentato

Base de datos de centralitasCLAAS › CLAAS JAGUAR 890 16L 370kW/496HP TEMIC

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 6 versiones de firmware

Datos del vehículo

MarcaCLAAS
ModeloJAGUAR
Motor890 16L 370kW/496HP TEMIC
Potencia de serie503 CV / 37 kW
Cilindrada16000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTractor

Centralita

FabricanteTEMIC
ModeloTEMIC PLD
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Flujo máximo de masa de aire a través del compresor
  • Limitador de presión de turbo
  • Protección contra sobrecalentamiento del motor
  • Protección contra sobrecalentamiento del motor 2
  • Protección contra sobrecalentamiento del motor 3
  • Gestión básica de par al arranque del motor
  • Ralentì del motor para el sensor ECT
  • Ángulo de inyección
  • Ángulo de inyección 2
  • Ángulo de inyección - corrección
  • Ángulo de emntrega inyección
  • Limitador de gases
  • Par máximo indicado
  • Perfil de par máximo

Identificadores de firmware (6)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
60A 1.54.017 TEMIC TEMIC PLD
06A 1.54.019 TEMIC TEMIC PLD
08E 1.54.011 TEMIC TEMIC PLD
56E 1.54.015 TEMIC TEMIC PLD
23F 1.54.006 TEMIC TEMIC PLD
53G 1.54.116 TEMIC TEMIC PLD

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
This Setting File can be used for serial system NewGenius.