TOYOTA LAND CRUISER PRADO (J120) 2.5L 16V L4 D-4D DOHC 106kW/142HP DENSO

Centralita DENSO 175822-887 · 144 CV (106 kW) · 2500 cc · Diesel sovralimentato

Base de datos de centralitasTOYOTA › TOYOTA LAND CRUISER PRADO (J120) 2.5L 16V L4 D-4D DOHC 106kW/142HP DENSO

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 5 versiones de firmware

Datos del vehículo

MarcaTOYOTA
ModeloLAND CRUISER PRADO (J120)
Motor2.5L 16V L4 D-4D DOHC 106kW/142HP DENSO
Potencia de serie144 CV / 106 kW
Cilindrada2500 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteDENSO
Modelo175822-887
Memoria / EPROMMICRO NEC 76F0039AGD - 512Kbit - 80000

Operaciones / opciones de tuning disponibles:

  • Limitador presión de turbo para diagnósticos
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Presion de geometria variable 1
  • Inyección corrección 2
  • Tiempo de apertura de inyección en rel. con presión iny.
  • Tiempo de apertura de inyección en rel. con presión iny. 2
  • Valor máximo de inyección
  • Valor máximo de inyección 2
  • Valor máximo de inyección dependendo do sensor APS/BPS
  • Valor máximo de inyección - limp mode
  • Corrección de inyección
  • Corrección de inyección para el sensor IAT
  • J
  • Limitador de carga
  • Máxima carga posible del motor
  • Carga máxima relativa aire motor
  • Limitator presión especifica inyecciòn
  • Presión especifica inyección
  • Pression especifica inyeccion 3
  • Flujo de masa de aire
  • Par pedido
  • Límite duty cycle geometría variable

Identificadores de firmware (5)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
89663-0KM95- 1.67.00430KM9500 DENSO 175822-887
89663-F0051- 1.67.0043F005100 DENSO 175822-887
89663-F0030- 1.67.0053F003000 DENSO 175822-887
89663-F0031- 1.67.0173F003100 DENSO 175822-887
89663-F0050- 1.67.0063F005000 DENSO 175822-887

Notas de la centralita

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata