TOYOTA INNOVA (AN40) 2.5L 16V L4 D-4D DOHC 75kW/102HP DENSO

Centralita DENSO 175822-666 · 102 CV (75 kW) · 2500 cc · Diesel sovralimentato

Base de datos de centralitasTOYOTA › TOYOTA INNOVA (AN40) 2.5L 16V L4 D-4D DOHC 75kW/102HP DENSO

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 4 versiones de firmware

Datos del vehículo

MarcaTOYOTA
ModeloINNOVA (AN40)
Motor2.5L 16V L4 D-4D DOHC 75kW/102HP DENSO
Potencia de serie102 CV / 75 kW
Cilindrada2500 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteDENSO
Modelo175822-666
Memoria / EPROMMICRO NEC 76F0040AGD - 512 Kbit - 80000

Operaciones / opciones de tuning disponibles:

  • Presión de turbo
  • Control válvula EGR
  • Inyección corrección 2
  • Tiempo de apertura de inyección en rel. con presión iny.
  • Tiempo de apertura de inyección en rel. con presión iny. 2
  • Valor máximo de inyección
  • Valor máximo de inyección 2
  • Valor máximo de inyección dependendo do sensor APS/BPS
  • Valor máximo de inyección - limp mode
  • Corrección de inyección
  • Corrección de inyección para el sensor IAT
  • J
  • Limitador de carga
  • Limitador de velocidad
  • Limitator presión especifica inyecciòn
  • Presión especifica inyección
  • Flujo de masa de aire

Identificadores de firmware (4)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
89663-0K370- 1.51.00930K37000 DENSO 175822-666
89663-0KD00- 1.51.01130KD0000 DENSO 175822-887
89663-0K371- 1.51.00530K37100 DENSO 175822-887
89663-0K301- 1.51.01530K30100 DENSO 175822-887

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Microprocessor NEC 76F0040GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Módulos adicionales disponibles

→ See all add-on modules on the shop