TOYOTA FORTUNER/SW4 (AN150/AN160) 3.0L 16V L4 D-4D 120kW/161HP DENSO

Centralita DENSO 175822-887 · 163 CV (12 kW) · 3000 cc · Diesel sovralimentato

Base de datos de centralitasTOYOTA › TOYOTA FORTUNER/SW4 (AN150/AN160) 3.0L 16V L4 D-4D 120kW/161HP DENSO

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 1 versiones de firmware

Datos del vehículo

MarcaTOYOTA
ModeloFORTUNER/SW4 (AN150/AN160)
Motor3.0L 16V L4 D-4D 120kW/161HP DENSO
Potencia de serie163 CV / 12 kW
Cilindrada3000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteDENSO
Modelo175822-887
Memoria / EPROMMICRO NEC 76F0040AGD - 512 Kbit - 80000

Operaciones / opciones de tuning disponibles:

  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Presion de geometria variable 1
  • Presion de geometria variable 2
  • Inyección corrección 2
  • Tiempo de apertura de inyección en rel. con presión iny.
  • Tiempo de apertura de inyección en rel. con presión iny. 2
  • Valor máximo de inyección
  • Valor máximo de inyección 2
  • Valor máximo de inyección dependendo do sensor APS/BPS
  • Valor máximo de inyección - limp mode
  • Corrección de inyección
  • Corrección de inyección para el sensor IAT
  • J
  • Limitador de carga 2
  • Limitador de velocidad
  • Máxima carga posible del motor
  • Carga máxima relativa aire motor
  • Limitator presión especifica inyecciòn
  • Presión especifica inyección
  • Flujo de masa de aire
  • Par pedido
  • Límite duty cycle geometría variable

Identificadores de firmware (1)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
89663-0KF20- 1.67.00630KF2000 DENSO 175822-887

Notas de la centralita

Microprocessor NEC 76F040AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata