TOYOTA AURIS (E180) 2.0L 16V D-4D 91kW/122HP DENSO

Centralita DENSO 275922-022 · 124 CV (91 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasTOYOTA › TOYOTA AURIS (E180) 2.0L 16V D-4D 91kW/122HP DENSO

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 1 versiones de firmware

Datos del vehículo

MarcaTOYOTA
ModeloAURIS (E180)
Motor2.0L 16V D-4D 91kW/122HP DENSO
Potencia de serie124 CV / 91 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteDENSO
Modelo275922-022
Memoria / EPROMMICRO NEC 76F0085 - 8192 Kbit - 100000

Operaciones / opciones de tuning disponibles:

  • Limitador presión de turbo para diagnósticos
  • Limitador de presión de turbo
  • Presión de turbo
  • Presión de turbo 2
  • Presión de turbo 3
  • Control válvula EGR
  • Control valvula EGR 2
  • Presion de geometria variable 1
  • Inyección corrección 2
  • Tiempo de apertura de inyección en rel. con presión iny.
  • Tiempo de apertura de inyección en rel. con presión iny. 2
  • Valor máximo de inyección
  • Valor máximo de inyección dependendo do sensor APS/BPS
  • Valor máximo de inyección - limp mode
  • Corrección de inyección
  • Corrección de inyección para el sensor IAT
  • J
  • Inyección 2
  • Limitador de velocidad
  • Máxima carga posible del motor
  • Inyección principal
  • Limitator presión especifica inyecciòn
  • Presión especifica inyección
  • Pression especifica inyeccion 3
  • Q
  • Flujo de masa de aire
  • Par pedido
  • Límite duty cycle geometría variable
  • Límite duty cycle geometría variable 2

Identificadores de firmware (1)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
89663-02U21- 1.51.004302U2100 DENSO 275922-022

Notas de la centralita

Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata