SKODA FABIA Mk2 (5J) 1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL

Centralita CONTINENTAL-SIEMENS-VDO PCR2.1 · 105 CV (77 kW) · 1600 cc · Diesel sovralimentato

Base de datos de centralitasSKODA › SKODA FABIA Mk2 (5J) 1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 20 versiones de firmware

Datos del vehículo

MarcaSKODA
ModeloFABIA Mk2 (5J)
Motor1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL
Potencia de serie105 CV / 77 kW
Cilindrada1600 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteCONTINENTAL-SIEMENS-VDO
ModeloPCR2.1
Memoria / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Operaciones / opciones de tuning disponibles:

  • Limitador de presión de turbo
  • Presión de turbo
  • Par máximo a embrague
  • Control válvula EGR
  • Factor por el par pedido al embrague
  • Tiempo de apertura de inyección en rel. con presión iny.
  • Limitador de carga 2
  • Limitador de carga 3
  • Limitador de carga
  • Limitador de par para la limitación de humo
  • Limitador de par en función de la alta temperatura de los gases de escape
  • Limitador de velocidad
  • Inyección principal
  • Limitator presión especifica inyecciòn
  • Limitator presión especifica inyecciòn para el sensor EFT
  • Presión especifica inyección
  • Flujo de masa de aire
  • Par pedido a alta velocidad en modalidad Sport - AT
  • Par pedido a alta velocidad - AT
  • Par pedido a baja velocidad - AT
  • Par pedido a baja velocidad - MT
  • Par pedido - MT

Identificadores de firmware (20)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
CAYB03L906023LL 1.94.00503L906023LL 9970 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.01203L906023DN 7504 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.01303L906023LM 8791 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.00703L906023LN 8375 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.01303L906023LN 9970 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.01003L906023DN 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.00203L906023LM 9983 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00903L906023DP 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.31.00503L906023LN 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.31.00403L906023DN 9981 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.31.00303L906023LM 9980 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.00203L906023LN 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.01203L906023LM 9972 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00903L906023DP 7505 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023BF 1.94.00403L906023BF 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.31.00903L906023LN 9972 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.00403L906023DN 8887 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00603L906023DP 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023QF 1.31.00303L906023QF 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00703L906023DP 8833 CONTINENTAL-SIEMENS-VDO PCR2.1

Notas de la centralita

TOTAL FILE MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed via PATCH UNLOCK with New Trasdata plugin 513. After the unlock it is possible to reprogram the ECU through OBDII port with New Genius. To work on this ECU you can use NewTrasdata
PARTIAL FILE MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0365.In order to use the FULL OBD2 mode of the serial protocol FLASH_0365 it is necessary first to read the FULL ecu file with New Trasdata plugin 994 and send the .DIM file to the Race technical support for the verification.Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 513 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0365. WARNING - New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed via PATCH UNLOCK with New Trasdata plugin 513. After the unlock it is possible to reprogram the ECU through OBDII port with New Genius. To work on this ECU you can use NewTrasdata

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop