SEAT EXEO 1.8L 20V TURBO 110kW/150HP ME7.5

Centralita BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

Base de datos de centralitasSEAT › SEAT EXEO 1.8L 20V TURBO 110kW/150HP ME7.5

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 3 versiones de firmware

Datos del vehículo

MarcaSEAT
ModeloEXEO
Motor1.8L 20V TURBO 110kW/150HP ME7.5
Potencia de serie150 CV / 11 kW
Cilindrada1800 cc
CombustibleBenzina sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.5
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Avance optimal
  • Limitador de presión de turbo
  • Limitador de presión de turbo 2
  • Limitador de presión de turbo 3
  • Limitador de presión de turbo 4
  • Limitador de presion de turbo 5
  • Cálculo de carga motor deseada
  • Inyección a carga parcial
  • Enriquecimiento Lambda para la protección de los componentes
  • Lambda pedida
  • Limitador sensor de picado
  • Cálculo de flujo de masa de aire del acelerador
  • Par óptimal del motor
  • P
  • Gestión presión de turbo maxima
  • Par pedido
  • Gestion ángulo mariposa

Identificadores de firmware (3)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
0261S046561037500825 1.42.0153R0906032 0004 BOSCH ME7.5
0261S046561037399152 1.42.0143R0906032 0003 BOSCH ME7.5
0261S058771037502779 1.42.0113R0906032A 0010 BOSCH ME7.5

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop