ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

Centralita BOSCH DDE 4.0 · 116 CV (85 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasROVER › ROVER 75 2.0L 16V CDT 85kW/116HP DDE 4.0

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 16 versiones de firmware

Datos del vehículo

MarcaROVER
Modelo75
Motor2.0L 16V CDT 85kW/116HP DDE 4.0
Potencia de serie116 CV / 85 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloDDE 4.0
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Limitador de presión de turbo
  • Presión de turbo
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (16)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
77855411037351065 1.03.0208633 BOSCH DDE 4.0
77855411037351065 1.03.0178637 BOSCH DDE 4.0
77855411037351065 1.03.0008639 BOSCH DDE 4.0
77855411037351065 1.03.0198635 BOSCH DDE 4.0
77855411037351065 1.03.0118633 BOSCH DDE 4.0
77855411037351065 1.03.0128633 BOSCH DDE 4.0
77855411037351065 1.03.0148633 BOSCH DDE 4.0
77880531037351514 1.03.001B136 BOSCH DDE 4.0
77880531037781514 1.03.013A132 BOSCH DDE 4.0
77880531037351514 1.03.002A132 BOSCH DDE 4.0
77880531037351514 1.03.006B134 BOSCH DDE 4.0
77929381037361846 1.03.001D245 BOSCH DDE 4.0
7792938123456789 1.03.008D245 BOSCH DDE 4.0
77929380123456789 1.03.002D245 BOSCH DDE 4.0
77929381037361846 1.03.002D246 BOSCH DDE 4.0
77929380123456789 1.03.000D246 BOSCH DDE 4.0

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Módulos adicionales disponibles

→ See all add-on modules on the shop