RENAULT TRUCK PREMIUM R 420.18 11.1L 303kW/406HP MS6.3

Centralita BOSCH EDC MS6.3 · 412 CV (303 kW) · 11100 cc · Diesel sovralimentato

Base de datos de centralitasRENAULT TRUCK › RENAULT TRUCK PREMIUM R 420.18 11.1L 303kW/406HP MS6.3

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 15 versiones de firmware

Datos del vehículo

MarcaRENAULT TRUCK
ModeloPREMIUM
MotorR 420.18 11.1L 303kW/406HP MS6.3
Potencia de serie412 CV / 303 kW
Cilindrada11100 cc
CombustibleDiesel sovralimentato
Tipo de vehículoTir

Centralita

FabricanteBOSCH
ModeloEDC MS6.3
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Inyección a carga parcial
  • Corrección de inyección
  • L
  • Limitador de carga

Identificadores de firmware (15)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
1.00.004P092V35 BOSCH EDC MS6.3
1.00.006 BOSCH EDC MS6.3
0281010043 1.00.005P157V81 BOSCH EDC MS6.3
0281010464 1.00.124P157V62 BOSCH EDC MS6.3
0281010464 1.00.002P157V62 BOSCH EDC MS6.3
0281010464 1.00.002P157V51 BOSCH EDC MS6.3
0281010805 1.00.126P092V35 BOSCH EDC MS6.3
0281010805 1.00.004P092V35 BOSCH EDC MS6.3
0281010805 1.00.137P092V35 BOSCH EDC MS6.3
0281010805 1.00.001P092V35 BOSCH EDC MS6.3
0281010966 1.00.118P157V81 BOSCH EDC MS6.3
0281010966 1.00.005P157V81 BOSCH EDC MS6.3
0281010966 1.00.003P157V81 BOSCH EDC MS6.3
0281010966 1.00.117P157V81 BOSCH EDC MS6.3
0281010F00 1.00.004P157V81 BOSCH EDC MS6.3

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. The ECU is located under the cabin, and it is fixed on the left side of the engine.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.