OPEL / SATURN / VAUXHALL ASTRA G 2.0L 16V DTI 74kW/100HP PSOP EDC15

Centralita BOSCH EDC15M · 101 CV (74 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL ASTRA G 2.0L 16V DTI 74kW/100HP PSOP EDC15

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 5 versiones de firmware

Datos del vehículo

MarcaOPEL / SATURN / VAUXHALL
ModeloASTRA G
Motor2.0L 16V DTI 74kW/100HP PSOP EDC15
Potencia de serie101 CV / 74 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloEDC15M
Memoria / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Fase de inyección
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (5)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
028101026710373XXXXX 1.01.01124417167.06 BOSCH EDC15M
028101026710373XXXXX 1.01.02424417167.05 BOSCH EDC15M
028101026710373XXXXX 1.01.01524417167.04 BOSCH EDC15M
028101026710373XXXXX 1.01.02224417167.05 BOSCH EDC15M
0281010456 1.01.00724417166.03 BOSCH EDC15M

Notas técnicas del vehículo

OBD con tapa, situado en la consola central, debajo del freno de estacionamiento.

Notas de la centralita

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. The ECU is located into Front driver-side wheel place, under plastic cover. This Setting File can be used for serial system : Genius or NewGenius.
2 original EPROM 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. The ECU is located into Front driver-side wheel place, under plastic cover. This Setting File can be used for serial system : Genius or NewGenius.

Módulos adicionales disponibles

→ See all add-on modules on the shop