LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

Centralita EFI T6E · 142 CV (104 kW) · 1600 cc · Benzina aspirato

Base de datos de centralitasLOTUS › LOTUS ELISE S3 CR 1.6L 16V 104kW/140HP EFI T6E

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 6 versiones de firmware

Datos del vehículo

MarcaLOTUS
ModeloELISE S3
MotorCR 1.6L 16V 104kW/140HP EFI T6E
Potencia de serie142 CV / 104 kW
Cilindrada1600 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteEFI
ModeloT6E
Memoria / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 8192 Kbit - 0x100000

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Altura maxima arbol de levas
  • Corrección Lambda
  • Correction Lambda 2
  • Inyección principal
  • Umbral de activación del ventilador stage 1
  • Umbral de activación del ventilador stage 2
  • Umbral de activación del ventilador con el motor apagado
  • VANOS CAM aspiraccion
  • Eficiencia volumétrica
  • VANOS CAM descarga

Identificadores de firmware (6)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
B132E0008FH120E0104 1.00.015 EFI T6E
B132E0008FB120E0196 1.00.011 EFI T6E
B132E0008FA120E0196 1.00.003 EFI T6E
B132E0008FE120E0104 1.00.017 EFI T6E
B132E0008FF120E0104 1.00.029 EFI T6E
B132E0008FJ120E0104 1.00.012 EFI T6E

Notas de la centralita

Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.
Microprocessor FMPC 5534 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop