LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Centralita BOSCH DDE 4.0 · 177 CV (13 kW) · 2900 cc · Diesel sovralimentato

Base de datos de centralitasLAND ROVER › LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 6 versiones de firmware

Datos del vehículo

MarcaLAND ROVER
ModeloRANGE ROVER (L322)
Motor2.9L 24V TD6 130kW/174HP DDE 4.0
Potencia de serie177 CV / 13 kW
Cilindrada2900 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloDDE 4.0
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Limitador de presión de turbo
  • Presión de turbo
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de carga
  • Limitador de gases
  • Limitador de velocidad
  • Presión especifica inyección
  • Flujo de masa de aire
  • Tiempo de overboost
  • Tiempo de overboost 1-2 marcha
  • Tiempo de overboost 5 marcha
  • Tiempo de overboost 3-4 marcha

Identificadores de firmware (6)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
1.03.015 BOSCH DDE 4.0
77894661037351777 1.03.020C118 BOSCH DDE 4.0
77894661037351935 1.03.009C118 BOSCH DDE 4.0
77913671037361814 1.03.019C226 BOSCH DDE 4.0
77913671037361814 1.03.001C230 BOSCH DDE 4.0
XXXXXXX1037361814 1.03.011C224 BOSCH DDE 4.0

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):