FORD GALAXY 1.9L 8V TDI 82kW/110HP Motronic

Centralita BOSCH MOTRONIC EDC TDI · 111 CV (82 kW) · 1900 cc · Diesel sovralimentato

Base de datos de centralitasFORD › FORD GALAXY 1.9L 8V TDI 82kW/110HP Motronic

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 4 versiones de firmware

Datos del vehículo

MarcaFORD
ModeloGALAXY
Motor1.9L 8V TDI 82kW/110HP Motronic
Potencia de serie111 CV / 82 kW
Cilindrada1900 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloMOTRONIC EDC TDI
Memoria / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Fase de inyección
  • Limitador de carga
  • Limitador de gases
  • Base de pre-inyección
  • Flujo de masa de aire

Identificadores de firmware (4)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810017361037356005/006 1.01.014 BOSCH MOTRONIC EDC TDI
02810017371037352601/602 1.01.004 BOSCH MOTRONIC EDC TDI
02810017371037357728/9 1.01.010 BOSCH MOTRONIC EDC TDI
02810019681037357607/8 1.01.009 BOSCH MOTRONIC EDC TDI

Notas técnicas del vehículo

OBD con tapa, situado en la consola central, detrás del compartimiento portaobjetos, entre la rejilla de aire y el cambio de marchas.

Notas de la centralita

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.