CITROEN SAXO 1.6L 8V 73kW/98HP ME7.4

Centralita BOSCH ME7.4 · 99 CV (73 kW) · 1600 cc · Benzina aspirato

Base de datos de centralitasCITROEN › CITROEN SAXO 1.6L 8V 73kW/98HP ME7.4

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 9 versiones de firmware

Datos del vehículo

MarcaCITROEN
ModeloSAXO
Motor1.6L 8V 73kW/98HP ME7.4
Potencia de serie99 CV / 73 kW
Cilindrada1600 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.4
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Avance a carga parcial
  • Cálculo de carga motor deseada
  • Temperatura del gas de escape
  • Limitador de avance
  • Enriquecimiento Lambda para la protección de los componentes
  • Limitador de revoluciones
  • Limitador sensor de picado
  • Par óptimal del motor

Identificadores de firmware (9)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612062461037353768 1.32.0179645802280 BOSCH ME7.4
02612068601037353101 1.32.0209642350680 BOSCH ME7.4
02612068601037353101 1.32.0329642350680 BOSCH ME7.4
02612062461037353467 1.32.0069643897680 BOSCH ME7.4.4
02612068601037353766 1.32.0219645800280 BOSCH ME7.4.4
02612068601037368532 1.32.0069653492480 BOSCH ME7.4.4
02612068601037353564 1.32.0149644842880 BOSCH ME7.4.4
02612068601037353179 1.32.0159640661980 BOSCH ME7.4.4
02612068601037353463 1.32.0299643897880 BOSCH ME7.4.4

Notas técnicas del vehículo

OBD situado en el lado izquierdo del conductor, por debajo del volante de dirección detrás del protector o en la puerta en la zona fusibles.

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!