CITROEN JUMPY 2.0L 8V HDI 69kW/93HP EDC15C2

Centralita BOSCH EDC15C2 · 94 CV (69 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasCITROEN › CITROEN JUMPY 2.0L 8V HDI 69kW/93HP EDC15C2

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 9 versiones de firmware

Datos del vehículo

MarcaCITROEN
ModeloJUMPY
Motor2.0L 8V HDI 69kW/93HP EDC15C2
Potencia de serie94 CV / 69 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoLCV

Centralita

FabricanteBOSCH
ModeloEDC15C2
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (9)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810103591037353045 1.05.017 BOSCH EDC15C2
02810105911037353871 1.05.0091037353871 BOSCH EDC15C2
02810108151037353963 1.05.0081037353963 BOSCH EDC15C2
02810108151037370509 1.05.0061037370509 BOSCH EDC15C2
02810108151037353822 1.05.0051037353963 BOSCH EDC15C2
02810108161037353626 1.05.010 BOSCH EDC15C2
02810113421037376576 1.05.0041037376576 BOSCH EDC15C2
02810113431037364457 1.05.0131037364457 BOSCH EDC15C2
02810114491037371449 1.05.0081037371449 BOSCH EDC15C2

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.