CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

Centralita BOSCH ME7.9.7 · 136 CV (1 kW) · 2000 cc · Benzina aspirato

Base de datos de centralitasCHERY › CHERY TIGGO 3 2.0L 16V 100kW/134HP ME7.9.7

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 1 versiones de firmware

Datos del vehículo

MarcaCHERY
ModeloTIGGO 3
Motor2.0L 16V 100kW/134HP ME7.9.7
Potencia de serie136 CV / 1 kW
Cilindrada2000 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.9.7
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Avance a carga parcial
  • Corrección Lambda
  • Referencia de carga acelerador / posición mariposa
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de avance
  • Limitador de carga
  • Limitador de revoluciones
  • Flujo de masa de aire

Identificadores de firmware (1)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
0261201613 1.42.003 BOSCH ME7.9.7

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!