AUDI TT (8N) 3.2L V6 24V 184KW/247HP ME7.1.1

Centralita BOSCH ME7.1.1 · 250 CV (184 kW) · 3200 cc · Benzina aspirato

Base de datos de centralitasAUDI › AUDI TT (8N) 3.2L V6 24V 184KW/247HP ME7.1.1

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 11 versiones de firmware

Datos del vehículo

MarcaAUDI
ModeloTT (8N)
Motor3.2L V6 24V 184KW/247HP ME7.1.1
Potencia de serie250 CV / 184 kW
Cilindrada3200 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.1.1
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Avance a carga parcial
  • Referencia de carga acelerador / posición mariposa
  • Inyección a carga parcial
  • Limitador de revoluciones/velocidad
  • Limitador de avance
  • Limitador de carga
  • Enriquecimiento Lambda para la protección de los componentes
  • Limitador sensor de picado
  • Limitador de velocidad
  • Flujo de masa de aire

Identificadores de firmware (11)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612011921037376096 1.21.010022997032E 6647 BOSCH ME7.1.1
02612082311037368661 1.21.020022906032DN 0006 BOSCH ME7.1.1
02612082321037374676 1.21.007022906032DP 7000 BOSCH ME7.1.1
02612082321037368662 1.21.008022906032DP 0006 BOSCH ME7.1.1
02612082341037369306 1.21.013022906032DR 5545 BOSCH ME7.1.1
02612085911037370152 1.21.006022906032FA 5903 BOSCH ME7.1.1
02612085911037376054 1.21.010022906032FA 6659 BOSCH ME7.1.1
02612086201037371937 1.21.015022906032FK 6439 BOSCH ME7.1.1
02612086311037369765 1.21.010022906032FR 5893 BOSCH ME7.1.1
02612086511037370121 1.21.007022906032GE 5871 BOSCH ME7.1.1
02612086511037374351 1.21.007022906032GE 7000 BOSCH ME7.1.1

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop