AUDI A6 (C4/4A) 2.8L VR6 142KW/193HP ME7.1

Centralita BOSCH ME7.1/5 · 193 CV (142 kW) · 2800 cc · Benzina aspirato

Base de datos de centralitasAUDI › AUDI A6 (C4/4A) 2.8L VR6 142KW/193HP ME7.1

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 6 versiones de firmware

Datos del vehículo

MarcaAUDI
ModeloA6 (C4/4A)
Motor2.8L VR6 142KW/193HP ME7.1
Potencia de serie193 CV / 142 kW
Cilindrada2800 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.1/5
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Avance a carga parcial
  • Referencia de carga acelerador / posición mariposa
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de avance
  • Limitador de carga
  • Referencia de carga acelerador / posición mariposa - AT
  • Flujo de masa de aire

Identificadores de firmware (6)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612061241037350721 1.21.0083B0907551E 0002 BOSCH ME7.1/5
02612063921037352463 1.21.0063B0907551A 0001 BOSCH ME7.1/5
02612066451037374319 1.21.0113B0907551A 0050 BOSCH ME7.1/5
02612067831037354053 1.21.0083B0907551B 0002 BOSCH ME7.1/5
02612067861037354049 1.21.0103B0907551BC 0001 BOSCH ME7.1/5
02612070141037354172 1.21.0113B0907551BL 0001 BOSCH ME7.1/5

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.