AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 132KW/177HP ME7.5

Centralita BOSCH ME7.5 · 179 CV (132 kW) · 1800 cc · Benzina sovralimentato

Base de datos de centralitasAUDI › AUDI A4 (B6/8E/8H) 1.8L 20V TURBO 132KW/177HP ME7.5

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 4 versiones de firmware

Datos del vehículo

MarcaAUDI
ModeloA4 (B6/8E/8H)
Motor1.8L 20V TURBO 132KW/177HP ME7.5
Potencia de serie179 CV / 132 kW
Cilindrada1800 cc
CombustibleBenzina sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.5
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Avance al ralentí
  • Avance optimal
  • Limitador de presión de turbo 4
  • Limitador de presion de turbo 5
  • Control de límite de presión turbo
  • Cálculo de carga motor deseada
  • Ratio límite de presión para diagnostico
  • Temperatura del gas de escape
  • Enriquecimiento Lambda para la protección de los componentes
  • Limitador de revoluciones
  • Linealización presión turbo
  • Lambda pedida
  • Limitador sensor de picado
  • Carga máxima presión de sobrealimentación
  • Par óptimal del motor
  • Offset de tolerancia en función del par admisible
  • Par admisible relativa de la posición del pedal en la limitación de par
  • Relación de presión en fonction de la temperatura aire admisión
  • Ratio Límite de presión para temperatura
  • Par pedido
  • Gestion ángulo mariposa
  • Corrección de la pulsación de admisión variable

Identificadores de firmware (4)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612068781037380902 1.42.007 BOSCH ME7.5
02612072161037360101 1.21.0174B0906018CH 0001 BOSCH ME7.5
02612072161037360854 1.21.0174B0906018CH 0002 BOSCH ME7.5
02612082301037378109 1.42.0158E0909518AK 0006 BOSCH ME7.5

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata