AUDI A3 (8P) 1.6L 16V 75kW/101HP ME7.5.10

Centralita BOSCH ME7.5.10 · 102 CV (75 kW) · 1600 cc · Benzina aspirato

Base de datos de centralitasAUDI › AUDI A3 (8P) 1.6L 16V 75kW/101HP ME7.5.10

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 1 versiones de firmware

Datos del vehículo

MarcaAUDI
ModeloA3 (8P)
Motor1.6L 16V 75kW/101HP ME7.5.10
Potencia de serie102 CV / 75 kW
Cilindrada1600 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.5.10
Memoria / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Avance optimal
  • Cálculo de carga motor deseada
  • Temperatura del gas de escape
  • Inyección a carga parcial
  • Enriquecimiento Lambda para la protección de los componentes
  • Lambda pedida
  • Limitador de velocidad
  • Cálculo de flujo de masa de aire del acelerador
  • Par óptimal del motor
  • Par pedido
  • Par pedido en marcha atrás
  • Gestion ángulo mariposa

Identificadores de firmware (1)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612080791037366334 1.21.007032906032G 3800 BOSCH ME7.5.10

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata