AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

Centralita BOSCH MOTRONIC · 90 CV (66 kW) · 1900 cc · Diesel sovralimentato

Base de datos de centralitasAUDI › AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 10 versiones de firmware

Datos del vehículo

MarcaAUDI
ModeloA3 (8L)
Motor1.9L 8V TDI 66KW/89HP PLCC Motronic
Potencia de serie90 CV / 66 kW
Cilindrada1900 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloMOTRONIC
Memoria / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Fase de inyección
  • Corrección de inyección
  • Limitador de carga
  • Limitador de gases
  • Base de pre-inyección
  • Flujo de masa de aire

Identificadores de firmware (10)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02810014101037355827/828 16 bit 1.01.015 BOSCH MOTRONIC
02810016931037357791/792 16 bit 1.01.011 BOSCH MOTRONIC
02810016931037357319/320 16 bit 1.01.013 BOSCH MOTRONIC
0281001728103735 16 bit 1.01.018 BOSCH MOTRONIC
02810017571037358252/253 16 bit 1.01.013 BOSCH MOTRONIC
02810018471037359496/497 16 bit 1.01.010 BOSCH MOTRONIC
028100184810373XXXXX/X 16 bit 1.01.006 BOSCH MOTRONIC
02810018521037359690/1 16 bit 1.01.013 BOSCH MOTRONIC
02810018521037359223/4 16 bit 1.00.013 BOSCH MOTRONIC
02810102421037352609/610 16 bit 1.01.012 BOSCH MOTRONIC

Notas técnicas del vehículo

OBD situado en el lado izquierdo del conductor, en el protector, cerca de la palanca de apertura del capó.

Notas de la centralita

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.