ALFA ROMEO 147 1.6L 16V TS 77kW/103HP ME7.3.1

Centralita BOSCH ME7.3.1 · 105 CV (77 kW) · 1600 cc · Benzina aspirato

Base de datos de centralitasALFA ROMEO › ALFA ROMEO 147 1.6L 16V TS 77kW/103HP ME7.3.1

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 1 versiones de firmware

Datos del vehículo

MarcaALFA ROMEO
Modelo147
Motor1.6L 16V TS 77kW/103HP ME7.3.1
Potencia de serie105 CV / 77 kW
Cilindrada1600 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.3.1
Memoria / EPROMHYBRID ECU - 4.096Kbit 0x80000

Operaciones / opciones de tuning disponibles:

  • Avance a carga parcial
  • Corrección Lambda
  • Referencia de carga acelerador / posición mariposa
  • Inyección a carga parcial
  • Inyección a plena carga
  • Limitador de avance
  • Limitador de carga
  • Limitador de velocidad
  • Carga específica de masa de aire 2
  • Referencia de carga acelerador / posición mariposa - AT
  • Cantidad masa de aire (diagnostico)
  • Flujo de masa de aire

Identificadores de firmware (1)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612077271037378169 1.38.01010H0Xw00 BOSCH ME7.3.1

Notas técnicas del vehículo

OBD situado en el lado izquierdo del conductor, por debajo del volante de dirección detrás del protector o en la puerta en la zona fusibles.

Notas de la centralita

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection Note for the SELESPEED version: before disconnecting the ECU make sure that the gearbox is in idle position to avoid car blockage. In that case use the Examiner. If after a correct modification a fault code appears, simply turn on the engine and the fault will be reset automatically after some starts. This Setting File can be used for serial system : Genius or NewGenius.

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop