media='all' />

Skoda Octavia 2.0 TDI CR 184hp

2017 - 2019

184 Original HP
220 Modified HP
380 Original NM
430 Modified NM
Print Certificate
Skoda Octavia

Skoda Octavia 2017 - 2019 2.0 TDI CR 184hp

Key Specifications

Generazione 2017 - 2019
Carburante Diesel
Codice motore CUPA
ECU Bosch EDC17C64 / Bosch EDC17C74
Rapporto compressione 15.8:1
Alesaggio x Corsa 81.0 X 95.5 mm
Power 184 → 220 hp +36 hp
Torque 380 → 430 Nm +50 Nm
Power
220 HP
+36 HP (+19.6%)
Original 184 HP
Stage 1 220 HP
Torque
430 NM
+50 NM (+13.2%)
Original 380 NM
Stage 1 430 NM

Power Graph

Original Power 184HP
Original Torque 380Nm
Power After Remap 220HP
Torque After Remap 430Nm

Discover Our Tuning Solutions

Frequently Asked Questions - Skoda Octavia

The cost of Stage 1 tuning for Skoda Octavia 2.0 TDI CR 184hp varies depending on the ECU (Bosch EDC17C64 / Bosch EDC17C74) and specific requirements. Contact us for a free personalized quote.

Stage 1 tuning for Skoda Octavia typically takes 1-2 hours of work. Time may vary depending on the ECU type.

Yes, our Stage 1 tunes are developed respecting the engine's safety margins. The power increase from 184 to 220 HP (+20%) is within safe parameters.

With Stage 1 tuning, Skoda Octavia goes from 184 HP to 220 HP (+36 HP) and from 380 Nm to 430 Nm (+50 Nm).

Stage 1 remapping takes it from 184 HP to 220 HP (+36 HP, +20%) and torque from 380 Nm to 430 Nm (+50 Nm). These figures refer to the standard engine, with no hardware modifications.

A remap changes the factory calibration, so on a vehicle still under manufacturer warranty it may affect coverage on powertrain components. Performance tuning keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a normal driving style consumption usually stays the same or drops slightly: the extra torque at low rpm means less throttle for the same speed. Consumption goes up only if you actually use the additional power.

Yes. The original file is read and stored before any modification, so the vehicle can be returned to the factory calibration at any time.

Have more questions about Skoda Octavia tuning?

Skoda
Skoda Octavia 2.0 TDI CR 184hp
+36 HP
220 HP