media='all' />

Renault Megane 1.9 DCi 130hp

3 - (ph1) - 2008 - 2012

130 Original HP
165 Modified HP
300 Original NM
365 Modified NM
Print Certificate
Renault Megane

Renault Megane 3 - (ph1) - 2008 - 2012 1.9 DCi 130hp

Key Specifications

Generazione 3 - (ph1) - 2008 - 2012
Carburante Diesel
Codice motore F9Q
ECU Bosch EDC16C36 / Bosch EDC16CP33 / Bosch EDC16C3
Rapporto compressione 18.3:1
Alesaggio x Corsa 80.0 X 93.0 mm
Power 130 → 165 hp +35 hp
Torque 300 → 365 Nm +65 Nm
Power
165 HP
+35 HP (+26.9%)
Original 130 HP
Stage 1 165 HP
Torque
365 NM
+65 NM (+21.7%)
Original 300 NM
Stage 1 365 NM

Power Graph

Original Power 130HP
Original Torque 300Nm
Power After Remap 165HP
Torque After Remap 365Nm

Discover Our Tuning Solutions

Frequently Asked Questions - Renault Megane

The cost of Stage 1 tuning for Renault Megane 1.9 DCi 130hp varies depending on the ECU (Bosch EDC16C36 / Bosch EDC16CP33 / Bosch EDC16C3) and specific requirements. Contact us for a free personalized quote.

Stage 1 tuning for Renault Megane typically takes 1-2 hours of work. Time may vary depending on the ECU type.

Yes, our Stage 1 tunes are developed respecting the engine's safety margins. The power increase from 130 to 165 HP (+27%) is within safe parameters.

With Stage 1 tuning, Renault Megane goes from 130 HP to 165 HP (+35 HP) and from 300 Nm to 365 Nm (+65 Nm).

Stage 1 remapping takes it from 130 HP to 165 HP (+35 HP, +27%) and torque from 300 Nm to 365 Nm (+65 Nm). These figures refer to the standard engine, with no hardware modifications.

A remap changes the factory calibration, so on a vehicle still under manufacturer warranty it may affect coverage on powertrain components. Performance tuning keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a normal driving style consumption usually stays the same or drops slightly: the extra torque at low rpm means less throttle for the same speed. Consumption goes up only if you actually use the additional power.

Yes. The original file is read and stored before any modification, so the vehicle can be returned to the factory calibration at any time.

Have more questions about Renault Megane tuning?

Renault
Renault Megane 1.9 DCi 130hp
+35 HP
165 HP