media='all' />

DS 3 / Cabrio 1.6 BlueHDI 8V 100hp

2015 ->

100 Original HP
130 Modified HP
254 Original NM
330 Modified NM
Print Certificate
DS 3 / Cabrio

DS 3 / Cabrio 2015 -> 1.6 BlueHDI 8V 100hp

Key Specifications

Generazione 2015 ->
Carburante Diesel
Codice motore DV6FDTED
ECU Bosch EDC17C10 / Bosch EDC17C60
Rapporto compressione 16.0:1
Alesaggio x Corsa 75.0 X 88.3 mm
Power 100 → 130 hp +30 hp
Torque 254 → 330 Nm +76 Nm
Power
130 HP
+30 HP (+30%)
Original 100 HP
Stage 1 130 HP
Torque
330 NM
+76 NM (+29.9%)
Original 254 NM
Stage 1 330 NM

Power Graph

Original Power 100HP
Original Torque 254Nm
Power After Remap 130HP
Torque After Remap 330Nm

Discover Our Tuning Solutions

Frequently Asked Questions - DS 3 / Cabrio

The cost of Stage 1 tuning for DS 3 / Cabrio 1.6 BlueHDI 8V 100hp varies depending on the ECU (Bosch EDC17C10 / Bosch EDC17C60) and specific requirements. Contact us for a free personalized quote.

Stage 1 tuning for DS 3 / Cabrio typically takes 1-2 hours of work. Time may vary depending on the ECU type.

Yes, our Stage 1 tunes are developed respecting the engine's safety margins. The power increase from 100 to 130 HP (+30%) is within safe parameters.

With Stage 1 tuning, DS 3 / Cabrio goes from 100 HP to 130 HP (+30 HP) and from 254 Nm to 330 Nm (+76 Nm).

Stage 1 remapping takes it from 100 HP to 130 HP (+30 HP, +30%) and torque from 254 Nm to 330 Nm (+76 Nm). These figures refer to the standard engine, with no hardware modifications.

A remap changes the factory calibration, so on a vehicle still under manufacturer warranty it may affect coverage on powertrain components. Performance tuning keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a normal driving style consumption usually stays the same or drops slightly: the extra torque at low rpm means less throttle for the same speed. Consumption goes up only if you actually use the additional power.

Yes. The original file is read and stored before any modification, so the vehicle can be returned to the factory calibration at any time.

Have more questions about DS 3 / Cabrio tuning?

DS
DS 3 / Cabrio 1.6 BlueHDI 8V 100hp
+30 HP
130 HP