media='all' />

Audi A8 55 TFSI (3.0T) 340hp

D5 - 2016 -> ...

340 Original HP
400 Modified HP
500 Original NM
600 Modified NM
Print Certificate
Audi A8

Audi A8 D5 - 2016 -> ... 55 TFSI (3.0T) 340hp

Key Specifications

Generazione D5 - 2016 -> ...
Carburante Petrol
Codice motore CZSE
ECU Bosch MED17 / Bosch MG1CS002 / Siemens/Continental Simos 16.1
Rapporto compressione 11.2:1
Alesaggio x Corsa 84.5 X 89.0 mm
Power 340 → 400 hp +60 hp
Torque 500 → 600 Nm +100 Nm
Power
400 HP
+60 HP (+17.6%)
Original 340 HP
Stage 1 400 HP
Torque
600 NM
+100 NM (+20%)
Original 500 NM
Stage 1 600 NM

Power Graph

Original Power 340HP
Original Torque 500Nm
Power After Remap 400HP
Torque After Remap 600Nm

Discover Our Tuning Solutions

Frequently Asked Questions - Audi A8

The cost of Stage 1 tuning for Audi A8 55 TFSI (3.0T) 340hp varies depending on the ECU (Bosch MED17 / Bosch MG1CS002 / Siemens/Continental Simos 16.1) and specific requirements. Contact us for a free personalized quote.

Stage 1 tuning for Audi A8 typically takes 1-2 hours of work. Time may vary depending on the ECU type.

Yes, our Stage 1 tunes are developed respecting the engine's safety margins. The power increase from 340 to 400 HP (+18%) is within safe parameters.

With Stage 1 tuning, Audi A8 goes from 340 HP to 400 HP (+60 HP) and from 500 Nm to 600 Nm (+100 Nm).

Stage 1 remapping takes it from 340 HP to 400 HP (+60 HP, +18%) and torque from 500 Nm to 600 Nm (+100 Nm). These figures refer to the standard engine, with no hardware modifications.

A remap changes the factory calibration, so on a vehicle still under manufacturer warranty it may affect coverage on powertrain components. Performance tuning keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a normal driving style consumption usually stays the same or drops slightly: the extra torque at low rpm means less throttle for the same speed. Consumption goes up only if you actually use the additional power.

Yes. The original file is read and stored before any modification, so the vehicle can be returned to the factory calibration at any time.

Have more questions about Audi A8 tuning?

Audi
Audi A8 55 TFSI (3.0T) 340hp
+60 HP
400 HP