FORD MONDEO Mk2 2.0L TDCi 96kW/129HP WP.41

Centralita DELPHI DCM3.1 · 131 CV (96 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasFORD › FORD MONDEO Mk2 2.0L TDCi 96kW/129HP WP.41

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) 20 versiones de firmware

Datos del vehículo

MarcaFORD
ModeloMONDEO Mk2
Motor2.0L TDCi 96kW/129HP WP.41
Potencia de serie131 CV / 96 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteDELPHI
ModeloDCM3.1
Memoria / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Operaciones / opciones de tuning disponibles:

  • Corrección de inyección
  • Limitador de carga
  • Flujo de masa de aire

Identificadores de firmware (20)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
1S7FBAFPUPL3E3.HEX 1.34.004 DELPHI DCM3.1
2S71CBPUQQ2H0.HEX 1.34.002 DELPHI DCM3.1
2S71CCPUQQ5H2.HEX 1.34.005 DELPHI DCM3.1
2S71CDPUQQ5H6.HEX 1.34.007 DELPHI DCM3.1
2S71CFPUQQ5HC.HEX 1.34.005 DELPHI DCM3.1
2S71CGPUQQ6H0.HEX 1.34.008 DELPHI DCM3.1
2S71CGPUQQ6H0.HEX 1.34.005 DELPHI DCM3.1
2S71CGPUQQ6H0.HEX 1.34.004 DELPHI DCM3.1
2S7ABLCPUQQ4U0.HEX 1.34.009 DELPHI DCM3.1
2S7ABLDPUQQ4UE.HEX 1.34.008 DELPHI DCM3.1
2S7ABLGPUQQ6U5.HEX 1.34.004 DELPHI DCM3.1
2S7ABPFPUQP2H0.HEX 1.34.008 DELPHI DCM3.1
2S7ABPJPUQQ5HA.HEX 1.34.005 DELPHI DCM3.1
2S7ABPKPUQQ5HB.HEX 1.34.006 DELPHI DCM3.1
3S71AAAPURS0U0.HEX 1.34.003 DELPHI DCM3.1
3S71AACPURS0U2.HEX 1.34.004 DELPHI DCM3.1
3S71ACBPURR3U1.HEX 1.34.005 DELPHI DCM3.1
3S7AVDPUQQ5H5.HEX 1.34.005 DELPHI DCM3.1
3S7AVFPUQQ5HD.HEX 1.34.002 DELPHI DCM3.1
4S41DBPURVE2.HEX 1.34.018 DELPHI DCM3.1

Notas técnicas del vehículo

OBD situado debajo del volante de dirección, por encima de los pedales. Visible u oculta por una cubierta de plástico.

Notas de la centralita

Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. This Setting File can be used for serial system NewGenius.