TOYOTA PROACE Mk2 2.0L 16V HDI 106kW/142HP DCM7.1A

ECU DELPHI DCM7.1A · 144 CV (106 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseTOYOTA › TOYOTA PROACE Mk2 2.0L 16V HDI 106kW/142HP DCM7.1A

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Vehicle data

BrandTOYOTA
ModelPROACE Mk2
Engine2.0L 16V HDI 106kW/142HP DCM7.1A
Stock power144 CV / 106 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeLCV

ECU

ManufacturerDELPHI
ModelDCM7.1A
Memory / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848Kbyte

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Exhaust gas temperature threshold for component protection
  • Injection period
  • Injection period 10
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection opening time related to inj. pressure
  • J
  • Injection 3
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter
  • Torque limiter for diagnostic
  • Torque limiter for smoke limitation
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum indicated virtual torque 2
  • Maximum engine power
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Max torque profile for IAT sensor
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure
  • Specific injection pressure 6
  • Specific injection pressure 7
  • Specific pressure injection after starting
  • Specific pressure injection after starting 2
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
98333465809833346580 1.00.0069696820980 DELPHI DCM7.1A
98333465809833346580 1.00.0319694867880 DELPHI DCM7.1A
98333465809833346580 1.00.0359696231780 DELPHI DCM7.1A
98333465809833346580 1.00.0169696816780 DELPHI DCM7.1A
98333465809833346580 1.00.0079695897480 DELPHI DCM7.1A
98333465809833346580 1.00.0039697757980 DELPHI DCM7.1A

ECU notes

Microprocessor TC297TP_96 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata