PEUGEOT 607 2.2L HDI 125kW/168HP EDC16CP39

ECU BOSCH EDC16CP39 · 170 CV (125 kW) · 2200 cc · Diesel sovralimentato

ECU DatabasePEUGEOT › PEUGEOT 607 2.2L HDI 125kW/168HP EDC16CP39

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 5 firmware versions

Vehicle data

BrandPEUGEOT
Model607
Engine2.2L HDI 125kW/168HP EDC16CP39
Stock power170 CV / 125 kW
Displacement2200 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16CP39
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Boost pressure
  • Boost pressure in aftertreatment modes
  • EGR valve control
  • EGR valve control 2
  • Exhaust gas temperature
  • Exhaust gas temperature 2
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Max injection limit 2
  • Max injection limit - limp mode
  • Initialization values over pressure control valve
  • J
  • Torque limiter 2
  • Boost pressure deviation limits for basic charge air pressure
  • Boost pressure deviation limits for basic charge air pressure 2
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature setpoint
  • LSU temperature threshold PID heater governor activation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific pressure injection after starting
  • Requested crankshaft/transmission torque
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Volumetric efficiency
  • Volumetric efficiency - correction
  • Turbocharger volumetric efficiency
  • Turbocharger volumetric efficiency 2
  • Variable geometry duty cycle limit

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1037386058 1.67.0051039398241 BOSCH EDC16CP39
1037379403 1.67.0091039398241 BOSCH EDC16CP39
1037380087 1.67.0031037381859 BOSCH EDC16CP39
1037386058 1.67.0071037386185 BOSCH EDC16CP39
1037379403 1.67.0071037381852 BOSCH EDC16CP39

Vehicle technical notes

OBD with lid located in the central tunnel under the parking brake lever.

ECU notes

The only way to modify this ECU is by using the BDM system: TRASDATA or NEW TRASDATA. Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. The only way to modify this ECU is by using the BDM system: TRASDATA or NEW TRASDATA.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata