PEUGEOT 306 1.6L 8V 65kW/88HP Motronic
ECU MARELLI 8P · 88 hp (64.7 kW) · 1600 cc · Benzina aspirato
ECU Database ›
PEUGEOT › PEUGEOT 306 1.6L 8V 65kW/88HP Motronic
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
12 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | PEUGEOT |
| Model | 306 |
| Engine | 1.6L 8V 65kW/88HP Motronic |
| Stock power | 88 hp / 64.7 kW |
| Displacement | 1600 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Auto |
ECU
| Manufacturer | MARELLI |
| Model | 8P |
| Memory / EPROM | 27C512 DIL28/PLCC32 512Kbit - Eprom 64K x 8 |
Available tuning operations / options:
- Advance at idle speed
- Advance at part load
- Advance full load
- Injection at part load
- Injection for IAT sensor
- Injection correction for IAT sensor
Firmware identifiers (12)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| 8P40 | — | 1.00.000 | — | MARELLI 8P |
| 0.261.204.052 | 2.537.355.863 | 1.00.007 | — | BOSCH MOTRONIC |
| 0.261.204.628 | 1.037.357.583 | 1.00.003 | — | BOSCH MOTRONIC |
| 0.261.200.652 | 1.267.357.400 | 1.00.004 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.676 | 1.267.358.062 | 1.00.004 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.677 | 1.267.358.065 | 1.00.004 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.678 | 1.267.357.454 | 1.00.004 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.679 | 1.267.357.455 | 1.00.003 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.694 | 1.267.358.170 | 1.00.006 | — | BOSCH MOTRONIC M 5.1 |
| 0.261.200.694 | 1.037.355.319 | 1.00.004 | — | BOSCH MOTRONIC M 5.1 |
| 0261200676 | 1267358064 | 1.00.004 | — | BOSCH MOTRONIC MP5.1 |
| 0.261.203.912 | 1.037.356.087 | 1.00.005 | — | BOSCH MP 5.2 |
Vehicle technical notes
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU notes
Original EPROM 87C257 DIL 28 pins TO work in real time with the emulator you need CNVLATCH adapters.
Original EPROM 28F512 PLCC 32 pins To read this EPROM with the EMP20/21 programmer you need PD32 adapters.
Original EPROM 27C512 DIL 28 pins