LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

ECU BOSCH DDE 4.0 · 177 CV (13 kW) · 2900 cc · Diesel sovralimentato

ECU DatabaseLAND ROVER › LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 6 firmware versions

Vehicle data

BrandLAND ROVER
ModelRANGE ROVER (L322)
Engine2.9L 24V TD6 130kW/174HP DDE 4.0
Stock power177 CV / 13 kW
Displacement2900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelDDE 4.0
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing
  • Overboost timing 1-2 gear
  • Overboost timing 5 gear
  • Overboost timing 3-4 gear

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.03.015 BOSCH DDE 4.0
77894661037351777 1.03.020C118 BOSCH DDE 4.0
77894661037351935 1.03.009C118 BOSCH DDE 4.0
77913671037361814 1.03.019C226 BOSCH DDE 4.0
77913671037361814 1.03.001C230 BOSCH DDE 4.0
XXXXXXX1037361814 1.03.011C224 BOSCH DDE 4.0

ECU notes

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):