English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

GOES COPPER 3.0 300 20-> 15kW

ECU BOSCH MSE6.0 · 20 CV (15 kW) · 300 cc · Benzina aspirato

ECU Database › GOES › GOES COPPER 3.0 300 20-> 15kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandGOES
ModelCOPPER 3.0 300
Engine20-> 15kW
Stock power20 CV / 15 kW
Displacement300 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelMSE6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
—X50204AA24 1.88.007F01RB0DX9U BOSCH MSE6.0
—X50204AA20 1.88.010F01RB0DX9U BOSCH MSE6.0

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other GOES

COBALT 550
20-> 25kW IRON 400
20-> 15kW 700 UTX
21-> 27kW XWOLF 700
23-> 35kW TERROX 500L EPS
24->25 24kW TERROX 400S
24->24 20kW TERROX 1000 S
26->26 66kW

→ All ECUs GOES