English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

GOES 700 UTX 21-> 27kW

ECU DELPHI MT05/MT05.2 · 37 CV (27 kW) · 700 cc · Benzina aspirato

ECU Database › GOES › GOES 700 UTX 21-> 27kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 7 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandGOES
Model700 UTX
Engine21-> 27kW
Stock power37 CV / 27 kW
Displacement700 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerDELPHI
ModelMT05/MT05.2
Memory / EPROMSAK XC164CS-32XXX

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Minimum advance allowed
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture for engine temperature at crancking
  • Advance full load
  • Lambda correction
  • Lambda correction for engine temperature after starting
  • Coil charge time
  • Engine idle vs. ECT sensor
  • Air mass flow MAP ratio based
  • Lambda target value
  • Lambda target value - open loop
  • RPM Limiter
  • RPM limiter related to the vehicle speed limiter
  • Speed limiter
  • Maximum advance allowed
  • MAF rate
  • Intake manifold pressure
  • Volumetric efficiency
  • Volumetric efficiency at idle

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0288190888888888 1.00.010— DELPHI MT05/MT05.2
1067183088888888 1.00.007— DELPHI MT05/MT05.2
1249100088888888 1.00.004— DELPHI MT05/MT05.2
1249145488888888 1.00.005— DELPHI MT05/MT05.2
3002081788888888 1.00.003— DELPHI MT05/MT05.2
3002092588888888 1.00.004— DELPHI MT05/MT05.2
6279023488888888 1.00.004— DELPHI MT05/MT05.2

ECU notes

This Setting File can be used for serial programming system NewGenius.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other GOES

COPPER 3.0 300
20-> 15kW COBALT 550
20-> 25kW IRON 400
20-> 15kW XWOLF 700
23-> 35kW TERROX 500L EPS
24->25 24kW TERROX 400S
24->24 20kW TERROX 1000 S
26->26 66kW

→ All ECUs GOES