Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 2 firmware versions
Vehicle data
| Brand | GENESIS |
| Model | G70 |
| Engine | 3.3L T-GDi 276kW/370HP SIM2K-260 |
| Stock power | 375 CV / 276 kW |
| Displacement | 3300 cc |
| Fuel | Benzina sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | CONTINENTAL-SIEMENS-VDO |
| Model | SIM2K-260 |
| Memory / EPROM | MICRO ST TRICORE - 32768 - 400000 |
Available tuning operations / options:
- Base timing
- Base timing 2
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction
- Load / throttle position reference
- Exhaust gas temperature
- Factor to correct fuel delivery system
- Engine idle
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint 2
- High pressure fuel pump setpoint 3
- Intake pressure protection
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda enrichment for components protection
- RPM Limiter
- Lambda reference
- Knock detection factor
- MAF sensor calibration
- Optimal engine moment
- Maximum pressure ratio limit depending on temperature
- Pop/blow off valve offset - close model
- Pop/blow off valve offset - open model
- Driver torque request
- Setpoint maximum turbocharger speed
- Throttle angle management
- Torque limit table for EOT sensor
- Torque limit table for ECT sensor
- Wastegate duty-cycle
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| A2C1980170001 | E6W248E1 |
1.96.009 | IKKN3TMW_F0C |
CONTINENTAL-SIEMENS-VDO SIM2K-260 |
| A2C1980170101 | E6W248E1 |
1.00.002 | IKHK3TMS_H0A |
CONTINENTAL-SIEMENS-VDO SIM2K-260 |
Vehicle technical notes
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU notes
EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
