GENESIS G80 Mk1 3.3L T-GDi 276kW/370HP SIM2K-260

ECU CONTINENTAL-SIEMENS-VDO SIM2K-260 · 375 hp (276 kW) · 3300 cc · Benzina sovralimentato

Firmware identifiers: DHKN3TM__F0B, E6W248E1, A2C3982360001, DHHS3TM__B3A

ECU Database › GENESIS › GENESIS G80 Mk1 3.3L T-GDi 276kW/370HP SIM2K-260

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 2 firmware versions

What you can order for this vehicle

Original ECU file CONTINENTAL-SIEMENS-VDO SIM2K-260

30 credits

The stock file for this ECU.

Sign up for free and order

Stage 1 file

from 100 credits

Delivered in 1-2 hours (working hours). Lifetime warranty on the file.

Sign up for free and order

Deletes and options

Add them to the file or order them on their own.

→ See the full price list

Sign up for free and order

How to order: free sign-up, upload the original file read from the ECU and choose the service. 1 credit = €1.

Do you have slaves or resell files too?Open your own file service portal under your brand Discover TuningFile →

Vehicle data

BrandGENESIS
ModelG80 Mk1
Engine3.3L T-GDi 276kW/370HP SIM2K-260
Stock power375 hp / 276 kW
Displacement3300 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIM2K-260
Memory / EPROMMICRO ST TRICORE - 32768 - 400000

Available tuning operations / options:

  • Base timing
  • Base timing 2
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction
  • Load / throttle position reference
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Engine idle
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • High pressure fuel pump setpoint 3
  • Intake pressure protection
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda reference
  • Knock detection factor
  • MAF sensor calibration
  • Optimal engine moment
  • Maximum pressure ratio limit depending on temperature
  • Pop/blow off valve offset - close model
  • Pop/blow off valve offset - open model
  • Driver torque request
  • Setpoint maximum turbocharger speed
  • Throttle angle management
  • Torque limit table for EOT sensor
  • Torque limit table for ECT sensor
  • Wastegate duty-cycle

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
A2C3982360001E6W248E1 1.96.016DHKN3TM__F0B CONTINENTAL-SIEMENS-VDO SIM2K-260
A2C3982360001E6W248E1 1.96.016DHHS3TM__B3A CONTINENTAL-SIEMENS-VDO SIM2K-260

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Get the file for this vehicle

Powered by TuningFile