MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

Calculateur BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

Base de données calculateursMERCEDES › MERCEDES S CLASS W140 S300 3.0L TD 130kW/175HP

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 4 versions firmware

Données véhicule

MarqueMERCEDES
ModèleS CLASS W140
MoteurS300 3.0L TD 130kW/175HP
Puissance d'origine177 CV / 13 kW
Cylindrée3000 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC1.4
Mémoire / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Opérations / options de tuning disponibles:

  • Injection pour le capteur de pression turbo 1
  • Pression turbo
  • Limiteur de couple

Identifiants firmware (4)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
0281001624/6251037357419/420 1.01.008 BOSCH EDC1.4
0281001624/6251037357419/420 1.01.006 BOSCH EDC1.4
0.280.001.4552.287.358.434 / 435 1.00.019 BOSCH MOTRONIC
02810016241037357710/1 16bit 1.01.011 BOSCH MOTRONIC EDC

Notes calculateur

Eprom PLCC 27C010 x 2 to read with PD32. Use autoswitching KEY520 modified in KEY 540. Modify injection map adding no more than 2 numbers only over 2500 rpm and 44% load, to avoid idle problems. In the function "New file for eprom" choose KEY520 and program the modified file on a 27C040.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY. To read this EPROM with the EMP20/21 programmer you need PD32 adapters.