MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

Calculateur BOSCH EDC1.4 · 177 CV (13 kW) · 3000 cc · Diesel sovralimentato

Base de données calculateursMERCEDES › MERCEDES E CLASS W210 E300 3.0L TD 130kW/175HP MOTRONIC

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 4 versions firmware

Données véhicule

MarqueMERCEDES
ModèleE CLASS W210
MoteurE300 3.0L TD 130kW/175HP MOTRONIC
Puissance d'origine177 CV / 13 kW
Cylindrée3000 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC1.4
Mémoire / EPROM27C040 DIL32/PLCC32 4Mbit - Eprom Eprom 256K x 16

Opérations / options de tuning disponibles:

  • Injection pour le capteur de pression turbo 1
  • Limiteur de couple
  • Limiteur de fumées
  • Débit de masse d'air

Identifiants firmware (4)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02810014941037355763/4 1.01.015 BOSCH EDC1.4
02810017531037357845/6 1.01.015 BOSCH MOTRONIC EDC
02810018801037356586/7 1.01.035 BOSCH MOTRONIC EDC
02810018801037352663/4 1.01.000 BOSCH MOTRONIC EDC

Notes calculateur

2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C020 or 29F020 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. Modify injection map adding no more than 550 numbers only over 2500 rpm and 50% of load, to avoid idle problems.