MERCEDES C CLASS W203 C270 2.7L 20V CDI 125kW/168HP EDC15C6

Calculateur BOSCH EDC15C6 · 170 CV (125 kW) · 2700 cc · Diesel sovralimentato

Base de données calculateursMERCEDES › MERCEDES C CLASS W203 C270 2.7L 20V CDI 125kW/168HP EDC15C6

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 11 versions firmware

Données véhicule

MarqueMERCEDES
ModèleC CLASS W203
MoteurC270 2.7L 20V CDI 125kW/168HP EDC15C6
Puissance d'origine170 CV / 125 kW
Cylindrée2700 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC15C6
Mémoire / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Opérations / options de tuning disponibles:

  • Injection pour le capteur de pression turbo 1
  • Injection pour le capteur de pression turbo 2
  • Limiteur de pression turbo
  • Pression turbo
  • Controle van EGR
  • Limiteur de couple
  • Limiteur de fumées
  • Pression specifique injection
  • Débit de masse d'air
  • Temps d'overboost

Identifiants firmware (11)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02810105311037351406 1.05.023 BOSCH EDC15C6
02810108021037351642 1.05.005 BOSCH EDC15C6
02810108571037351718 1.05.014 BOSCH EDC15C6
02810108571037351718 1.05.020 BOSCH EDC15C6
02810108581037351719 1.05.002 BOSCH EDC15C6
02810109121037351740 1.05.013 BOSCH EDC15C6
02810110571037351862 1.05.003 BOSCH EDC15C6
02810110681037351884 1.05.011 BOSCH EDC15C6
02810111821037365037 1.05.015 BOSCH EDC15C6
02810118281037365306 1.05.007 BOSCH EDC15C6
02810121961037365327 1.05.012 BOSCH EDC15C6

Notes calculateur

original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.

Modules additionnels disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop