FORD GALAXY 1.9L 8V TDI 85kW/114HP EDC15 P/P+

Calculateur BOSCH EDC15P+ · 116 CV (85 kW) · 1900 cc · Diesel sovralimentato

Base de données calculateursFORD › FORD GALAXY 1.9L 8V TDI 85kW/114HP EDC15 P/P+

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) 10 versions firmware

Données véhicule

MarqueFORD
ModèleGALAXY
Moteur1.9L 8V TDI 85kW/114HP EDC15 P/P+
Puissance d'origine116 CV / 85 kW
Cylindrée1900 cc
CarburantDiesel sovralimentato
Type de véhiculeAuto

Calculateur

FabricantBOSCH
ModèleEDC15P+
Mémoire / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Opérations / options de tuning disponibles:

  • Limiteur de pression turbo
  • Pression turbo
  • Controle van EGR
  • Angle d'injection charge partielle
  • Angle d'injection à plein charge
  • Injection correction
  • Limiteur de couple
  • Limiteur de fumées
  • Pre-injection base
  • Débit de masse d'air
  • Temps d'overboost

Identifiants firmware (10)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
02810102211037360084 1.13.014038906019BF 1255 BOSCH EDC15P+
02810102211037354463 1.13.012038906019BF 1088 BOSCH EDC15P+
02810102401037352299 1.08.010038906019BE 0816 BOSCH EDC15P+
02810106291037363161 1.13.015038906019FA 1516 BOSCH EDC15P+
02810106291037360460 1.13.026038906019FA 1269 BOSCH EDC15P+
02810106291037363952 1.13.012038906019FA 1561 BOSCH EDC15P+
02810106291037362698 1.13.015038906019FA 1454 BOSCH EDC15P+
02810106291037362033 1.13.009038906019FA 1365 BOSCH EDC15P+
02810106291037362765 1.13.014038906019FA 1457 BOSCH EDC15P+
02810111431037366045 1.13.008038906019LR 1565 BOSCH EDC15P+

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. The ECU is located in the engine compartment behind the battery.
Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. The ECU is located in the engine compartment behind the battery.