PORSCHE 997 3.8L CARRERA S 261kW/350HP ME7.8.1

Centralita BOSCH ME7.8.1 · 355 CV (261 kW) · 3800 cc · Benzina aspirato

Base de datos de centralitasPORSCHE › PORSCHE 997 3.8L CARRERA S 261kW/350HP ME7.8.1

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 54 versiones de firmware

Datos del vehículo

MarcaPORSCHE
Modelo997
Motor3.8L CARRERA S 261kW/350HP ME7.8.1
Potencia de serie355 CV / 261 kW
Cilindrada3800 cc
CombustibleBenzina aspirato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloME7.8.1
Memoria / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Operaciones / opciones de tuning disponibles:

  • Gestión principal del avance
  • Avance mínima permitido
  • Avance optimal
  • Cálculo de carga motor deseada
  • Corrección de Lambda en fonction temperatura del motor después del arranque
  • Temperatura del gas de escape
  • Factor para corregir el sistema de inyección de combustible
  • Factor para corregir el sistema de inyección de combustible 2
  • Límite alto flujo de aire HFM / HLM
  • Límite bajo flujo de aire HFM / HLM
  • Enriquecimiento Lambda para la protección de los componentes
  • Limitador de par en función de la alta temperatura de los gases de escape
  • Eficiencia Lambda
  • Limitador de revoluciones
  • Limitador de revoluciones en posición neutral / estacionamiento
  • Lambda pedida
  • Limitador sensor de picado
  • Calibración sensor MAF
  • Par máximo indicado
  • Par máximo indicado 2
  • Maximum ignition delay allowed for knock limiter intervention
  • Máxima carga posible del motor
  • Cálculo de flujo de masa de aire del acelerador
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Par óptimal del motor
  • Offset de tolerancia en función del par admisible
  • Par admisible relativa de la posición del pedal en la limitación de par
  • Par admisible relativa de la posición del pedal en la limitación de par - modalidad sport/race
  • Par admisible relativa de la posición del pedal en la limitación de par - modalidad sport/race 2
  • Solicite del acelerador
  • Par pedido
  • Par pedido en marcha atrás
  • Par pedido en modalidad Sport
  • Umbral máximo para la detección de golpeteo del motor - banco 1
  • Umbral máximo para la detección de golpeteo del motor - banco 2
  • Gestion ángulo mariposa
  • Corrección de la pulsación de admisión variable

Identificadores de firmware (54)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
02612079871037369642 1.27.0080041900007333A19 BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007333A22 BOSCH ME7.8.1
02612079871037379149 1.27.0160041900007413A08 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A01 BOSCH ME7.8.1
02612079871037379149 1.27.0040041900007413A12 BOSCH ME7.8.1
02612079871037369642 1.27.0140041900007113A14 BOSCH ME7.8.1
02612079871037379149 1.27.0060041900007413A0D BOSCH ME7.8.1
02612079871037369642 1.27.0130041900007333A18 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007333A11 BOSCH ME7.8.1
02612079871037369642 1.27.0160041900007333A29 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007103A0E BOSCH ME7.8.1
02612079871037379149 1.27.0050041900007413A02 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A02 BOSCH ME7.8.1
02612079871037369642 1.27.0460041900007113A03 BOSCH ME7.8.1
02612079871037379149 1.27.0040041900007413A01 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007337A07 BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007333A01 BOSCH ME7.8.1
02612079871037369642 1.27.009004190000710390D BOSCH ME7.8.1
02612079871037369642 1.27.0210041900007103A08 BOSCH ME7.8.1
02612079871037379149 1.27.0240041900007411037 BOSCH ME7.8.1
02612079871037379149 1.27.0080041900007417A17 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A0K BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007337A2J BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007103901 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007113A04 BOSCH ME7.8.1
02612079871037369642 1.27.005004190000710390E BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007413939 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A19 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007337A16 BOSCH ME7.8.1
02612079871037379149 1.27.0050041900007413A0K BOSCH ME7.8.1
02612079871037379149 1.27.0080041900007413A18 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007337A17 BOSCH ME7.8.1
02612079871037369642 1.27.0080041900007333A03 BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007413A09 BOSCH ME7.8.1
02612079871037369642 1.27.0090041900007333A09 BOSCH ME7.8.1
02612079871037379149 1.27.0130041900007413A19 BOSCH ME7.8.1
02612079871037369642 1.27.0110041900007333A08 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007103A0L BOSCH ME7.8.1
02612079871037369642 1.27.0150041900007103A09 BOSCH ME7.8.1
02612083001037369620 1.27.00800419100A8223A34 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A13 BOSCH ME7.8.1
02612083001037369620 1.27.00700419100A8227A09 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A03 BOSCH ME7.8.1
02612083001037379150 1.27.00400419100A8423A14 BOSCH ME7.8.1
02612083001037379150 1.27.00500419100A8423A13 BOSCH ME7.8.1
02612083001037379150 1.27.00300419100A8423A04 BOSCH ME7.8.1
02612083001037379150 1.27.00700419100A8423A23 BOSCH ME7.8.1
02612083001037369620 1.27.01200419100A8223A33 BOSCH ME7.8.1
02612083001037379150 1.27.00600419100A8423A24 BOSCH ME7.8.1
02612083001037379150 1.27.00300419100A8423924 BOSCH ME7.8.1
02612083001037369620 1.27.00800419100A8227A29 BOSCH ME7.8.1
02612083001037369620 1.27.01200419100A8223A23 BOSCH ME7.8.1
02612083001037379150 1.27.01500419100A8423A03 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A24 BOSCH ME7.8.1

Notas de la centralita

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Módulos adicionales disponibles

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop