OPEL / SATURN / VAUXHALL ZAFIRA A 2.0L DI 82/101HP PLCC EDC15M

Centralita BOSCH EDC15M · 101 CV (74 kW) · 2000 cc · Diesel sovralimentato

Base de datos de centralitasOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL ZAFIRA A 2.0L DI 82/101HP PLCC EDC15M

Encuentra los identificadores del firmware (hardware, software y actualización), las opciones de tuning disponibles y cómo obtener el archivo original o remapeado.

✓ Tuning por archivo (flash) ✓ Módulo adicional disponible 9 versiones de firmware

Datos del vehículo

MarcaOPEL / SATURN / VAUXHALL
ModeloZAFIRA A
Motor2.0L DI 82/101HP PLCC EDC15M
Potencia de serie101 CV / 74 kW
Cilindrada2000 cc
CombustibleDiesel sovralimentato
Tipo de vehículoAuto

Centralita

FabricanteBOSCH
ModeloEDC15M
Memoria / EPROM2 X 29F010 PLCC32 1Mbit

Operaciones / opciones de tuning disponibles:

  • Inyección para el sensor de presión turbo 1
  • Limitador de presión de turbo
  • Presión de turbo
  • Control válvula EGR
  • Fase de inyección
  • Limitador de carga
  • Limitador de gases
  • Flujo de masa de aire
  • Tiempo de overboost

Identificadores de firmware (9)

N.º HardwareN.º Software (chip)VersiónSoftware de actualizaciónCentralita
1.01.005 BOSCH EDC15M
02810016311037356442/3 16 bit 1.01.01590508976.05 BOSCH EDC15M
028100163610373XXXXX 1.01.00890565941.07 BOSCH EDC15M
028100175110373XXXXX 1.01.02190582540.02 BOSCH EDC15M
028101002110373XXXXX 1.00.00709133269.04 BOSCH EDC15M
028101002110373XXXXX 1.00.00709133269.05 BOSCH EDC15M
028101002110373XXXXX 1.01.03209133269.02 BOSCH EDC15M
0281010268 1.01.02624417169.06 BOSCH EDC15M
028101026810373XXXXX 1.01.02524417169.04 BOSCH EDC15M

Notas técnicas del vehículo

OBD con tapa, situado en la consola central, debajo del freno de estacionamiento.

Notas de la centralita

2 original EPROM 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. The ECU is located into Front driver-side wheel place, under plastic cover.
2 original EPROM 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. The ECU is located into Front driver-side wheel place, under plastic cover. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL.

Módulos adicionales disponibles

→ See all add-on modules on the shop